Spray Foam Insulation in Brockton, ON
Spray foam and other insulation for Brockton homes, whether it's a house off Brock Avenue or a converted mansion in Parkdale Village.
We install spray foam insulation in Brockton and the streets around it, about 1 km from us. A house off Brock Avenue and a converted mansion near King Street need different plans.
Brock Avenue, Bloordale and the M6K streets
Brock Avenue runs north-south through Brockton. Bloordale Village runs along Bloor Street from Dufferin Street to Lansdowne Avenue, on Brockton's northern edge. A job in the M6K postal area might be a house on a side street or a building on Bloor, and those two need different plans.
If your home has an attic, we start there. First we air seal around the chimney and the plumbing stack. Then we build up the insulation over the top-floor ceiling so warm air stops leaking into the roof space.
If your building has a business at street level and a home upstairs with no attic above the top unit, the insulation has to go in the roof cavity or on the underside of the deck. If the ceiling is open, closed-cell spray foam works well here. It sticks to the deck and keeps warm, damp indoor air away from the cold boards above. If the ceiling is closed, our flat roof insulation page explains the options.
Big old houses turned into units in Parkdale Village
Plenty of Parkdale mansions from around 1900 are still standing, and many have been split into multi-unit buildings. You'll also find Victorian houses on Cowan Avenue and Dunn Avenue, south of King Street. When a big house becomes several units, all those households end up sharing one roof and one foundation.
So we start with the parts everyone shares. The rim joists, where the floor framing meets the foundation wall, are a common source of draughts in older houses, and spray foam there closes them up. Foam under the roof seals the top of the building. Every unit benefits from both. If there's a basement, the rim joist work falls under basement insulation, and we can do it without going into anyone's unit upstairs.
Ceilings and walls inside each unit are a separate call. We work those out with the owner one unit at a time, since one might have just been renovated while the one next door still has its original plaster.
Where a landlord or owner should start
Start with the rim joists if your multi-unit house has an unfinished basement or crawl space. They're easy to get at, and closed-cell foam fills every gap around the joist ends.
The roof or attic is next. An attic can be air sealed and topped up with blown-in insulation. If the top floor is under a flat roof with no attic, we spray foam from below when the ceiling is open.
Walls go last. The best time is when a unit is being renovated anyway. Once it's down to the studs, we can fill every bay and check it before the drywall goes back on. If the walls are staying closed, we can still dense-pack wall insulation through small holes and patch them afterwards.
Going in that order means each step makes the next one worth more. You don't want to pay for wall insulation while heat is still pouring out through the roof. Our spray foam insulation page explains the closed-cell and open-cell foams we use.
Close by: Little Portugal, Dufferin and Parkdale
The areas we serve closest to Brockton are Little Portugal, Dufferin and Parkdale. If you own a place in one of them, have a look at our pages for Little Portugal, Dufferin and Parkdale. Each page covers its own streets and what they mean for insulating a house there.
Local details for Brockton
- Postal codes: M6K
- Distance: About 1 km away in a straight line
- Permit rules: toronto.ca
- Nearby: Little Portugal, Dufferin, Parkdale
About Brockton: Brockton, ON on Wikipedia ยท Brockton on Google Maps
FAQ
Insulation questions from Brockton
Yes. Spray foam can go anywhere in a house split into units where the framing is exposed or we can reach it, like the rim joists and the underside of the roof. Every unit shares those parts, so sealing them helps the whole building. Ceilings and walls inside each unit get planned with the owner, usually when that unit is being renovated.
In a converted Parkdale Village house, start at the rim joists and the roof or attic. Air leaks in those two spots affect every unit, and we can usually get to both without disturbing the people who live there. The walls come later, one unit at a time, as each gets renovated.
No, you don't need a building permit to add or replace insulation in Brockton, though the work still has to meet the Zoning Bylaw. That applies to new insulation and to replacements, so pulling out worn material and putting in new is covered the same way.
Services
Services in Brockton, ON

Attic Insulation
Learn more
Loose-Fill (Blown-In) Insulation
Learn more
Old Insulation Removal
Learn more
Basement Insulation
Learn more
Roof & Flat Roof Insulation
Learn more
Wall Insulation
Learn more
Closed-Cell Spray Foam
Learn more
Open-Cell Spray Foam
Learn more
Spray Foam Insulation Cost
Learn moreGet a Quote
Request an insulation visit in Brockton
Tell us the address and which part of the house bothers you, whether that is a cold top floor, a drafty basement or a ceiling with no attic above it. Phone or use the form. We'll set up a time to look at the house, then give you a written quote.